T1 Series

The three-phase double conversion UPS range of the T1 series by Converter Industry®, ranging from 10 to 800kVA, is an uninterrupted power supply system that sums up many unique, innovative and flexible characteristics that can cope with any demand of the market.

Double conversion with transformer
VFI – SS – 111 classification according to EN 62040-3
It can be used as frequency converter and voltage stabilizer
High overall efficiency
Parallelable in Redundancy or Power configuration (up to 4 units)
RS232 communication (RS485 optional) on SNMP Megatec protocol, monitoring and shutdown management software (Megatec)
“Green Mode” option
Control panel with LED synoptic diagram and LCD display

back

Double conversion with transformer
VFI – SS – 111 classification according to EN 62040-3
Reduced size
Silent ventilation thanks to the double speed
It can be used as frequency converter and voltage stabilizer
High overall efficiency
SNMP and remote monitoring and shutdown management software (optional)

back

APPLICATIONS
The emergency systems of the S series are suitable for civil and industrial use where it is necessary to supply 230V single-phase equipments and the temporary blackout can cause the interruption of the installed electric devices.

FUNCTIONING
The S series systems recharge batteries when the power is on and supply power to the outlet.
When the power is off, the S series systems convert the power of the batteries into 230V single-phase and supply the outlet.
On demand, the S series systems can work in emergency (lack of output when the power is on).

back

APPLICATIONS
The emergency systems of the S-A Series are suitable for civil and industrial use when it is necessary to supply power to a single-phase 230V electric pump and a temporary blackout could cause the flooding of premises located below the water sewerage system damaging THINGS AND PEOPLE.

CHOOSING THE PRODUCT
The choice of the S-A Series systems must be based on the characteristics of the premises that must be protected from flooding and on the power of the electric pumps to be installed. To increase protection against flooding, it is advisable to install two electric pumps (only S-A systems from 600 to 5000) because:
In case of failure of one electric pump, the functioning of the system is granted by the back-up pump.
In case of exceptional rain, the two pumps can work simultaneously.

back

‘Programmable double conversion on-line’ type
VFI – SS – 111 classification according to EN 62040-3
Single-phase input and output
Three-phase input and single-phase output
(TM versions)
Sinusoidal output with a THD lower than 3%
Selectable ‘High efficiency’ performance
Standard RS232 and USB port, SNMP interface
(preset slot)
Information and dynamic conditions displayed on a LCD display
Shut-down and reboot management software
ABM: advanced battery management
‘Green mode’ functioning (automatic power off when uncharged)
EPO - Emergency Power Off
Testing of the correct connection of the neutral wire

back

‘On-line’ double conversion technology
Single-phase input and output
Sinusoidal output voltage
High efficiency
Microprocessor management
Standard automatic by-pass
Self-Diagnostics
Battery level indicator
Charge level indicator
Telephone line protection and RJ11 plug modem
Increase of autonomy with battery box
RS232 communication interface
Control and management software included
Compact size
Also available in the Rack version

Optional:
SNMP converter and software

back

EP-SS Series
Line-interactive technology
Perfect sinusoidal output
Boost and Buck stabilization system (A.V.R.)
Microprocessor digital control
USB and RS232 software interface
‘Hot swap’ battery replacement
Spike Tel / Modem protection
SNMP (optional)

back

E series
Line-interactive technology
AVR system stabilization
Microprocessor control
Step-Wave wave form (pseudo-sinusoidal)
USB communication port
Interface software
Telephone/Modem protection

RACK SOLUTION
EP-SS RACK line interactive step-wave
Sinusoidal RACK line interactive
Programmable double conversion on-line RACK
‘Hot Swap’ battery replacement
Compliance & mechanical standards for networking and server 19” rack cabinet applications

back

via Euclide, 12
47100 Forlì
tel. +39.0543.705434
fax +39.0543.705273
P.IVA 03198030409

info@converterindustry.com

last update 30.01.2007

suggested resolution 1024x768px
web site by Input2001